Minerals, chemicals, metals
A great number of processes require at some stage a dryer, a cooler, a mixer, or a reactor. Ingetecsa can supply all the equipment for this. Equally important, most of these process steps we can simulate in our test centre.
We offer a comprehensive range of process equipment for your products. The design of each dryer, calciner, cooler, mixer, or reactor is around reliability, accessibility, and performance. Products we process vary as example from lithium to HDPE, from rare earth to PVC, from Melamine to sodium sulfate to zinc oxide. The feed stock can be anything such as a liquid, a sticky glue or a sub-micron powder.
All equipment of INGETECSA is suitable for both indoor and outdoor installation. These can be fully washed down if desired. Furthermore, every unit normally operates under a light vacuum. Dust emissions stay at an absolute minimum by using for instance very high efficiency cyclones, bag house filters and water/gas scrubbers. Normally, all our equipment is used full continuously. Also, some of our units/processes allow a batch wise operation too. Where needed is our equipment explosion resistant. Accessibility and reliability are one of our key design factors.
We offer the following process steps:
- Drying process
- Cooling process, click here
- Solidification process, click here
- Mixing processes / reaction process, click here
Go to our download section for downloading the brochures.